Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the responsiveness of gas cooktops, but needs an oven to bake in? Discover a dual-fuel range cooktop that offers the best of both worlds.
Many experienced home chefs favor gas cooktops for their superior temperature control and the ability to use sophisticated cooking techniques, such as charcoaling. These stoves are costly though, especially in the event that you require an additional gas hook-up as well as an electrician to install it.
What is a 13amp plug?
If you have a dual-fuel range cooker (also called a gas and electric oven) you'll require a 13 amp plug. The plug should also be hard-wired by a licensed electrician into the cooker ring.
This ensures that the current flowing through the plug is safe and not too high which could create an electrical fire hazard. The plug is equipped with an electric fuse that regulates the current. The fuse blows whenever the current flows through it over its capacity, which protects the appliance from an over-charge of electricity.
The fuse is rated 13 amps, as indicated on the top of the plug. This indicates the maximum amount of current the plug could pass without damaging the appliance or causing heat to the socket. When replacing fuses, it's important to select the same amperage rating that was used in the original. You run the risk of overheating a socket if you replace a fuse using a different rating.
A 13 amp fuse is likely to be a type of ceramic, which is very durable and can withstand the high temperatures generated by the range cooker. Ceramic elements are also fire-resistant, and therefore a better choice than other types.
There are many ways that 13 amp plugs can be fitted. It could be wired to an existing live socket and the flex is then connected to this by either a screw or a jaw-type cord clamp. The plug must be pushed firmly into place and tightened, making sure the clamp is secure.
Before connecting range cookers dual fuel , you may need to remove the wiring diagram on cardboard which is placed on top of the pins on some plugs. The wires should be cut to the right length, as if they are too long, they may be crushed when the plug covers are replaced. The earth wire should be the longest to connect it before the line and neutral pins.
How do I connect a 13amp plug?
The vast majority of dual fuel range cookers in UK are wired with an amp rating of 13 amps. This is vital because ovens draw a large amounts of current, while the standard plug sockets have a rating of 10 amps.
Generally speaking, new appliances must be equipped with a plug at the point of sale. This is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug connected and this is the reason for the problem.
The first thing to consider when connecting a cooker with an existing plug socket is to make sure that the fuse rating in the fuse box matches the rating of the plug. This is vital because an incorrectly-sized fuse can be dangerous.
It is also recommended to check that the fuse has been fully seated into the cartridge, and that there isn't any excessive movement. The next step is to prepare the flex that will be used. First remove the sheathing from the flex in order to expose the three conductors that are insulated within. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) using a utility knife, but without damaging the individual conductors. The nick should be wide enough that the sheathing can split and enlarge the nick when it is pulled back revealing the cable beneath. Finally, cut off the excess sheathing, leaving approximately 40mm of length that extends beyond the flex end.
This flex is placed over the plug with the earth terminal at the top, and the neutral and live terminals at the bottom. Using the conductors with the colors to guide you, the sheathing is then removed from each pin and the internal cable is inserted into the appropriate terminal using the cord grip. If the plug has a clamp for cords that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Connect each insulated wire to the appropriate terminal by using the channel in the plug. Start with the earth conductor, then the neutral, and finally, the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw for 13amp plugs at 300 volts is 3kw. This is a lot of power, however the standard fuse in the UK plug will not fail until the cable is at a risky temperature. It is important to be aware of the power you are using in your kitchen as a faulty plug or socket can cause a fire.
The ceramic fuses used in plugtops are approximately 25mm in diameter and are designed for 240V mains. They will have the BS kitemark or similar marking on the side, and they contain sand. There are plastic or glass alternatives but they should not be used with a live plug unless you want to cause a fire and be electrocuted!
Most dual fuel range cookers in the UK require hard-wired and will not plug directly into the wall socket. They are typically connected to a specific cooker ring circuit that is suitable for appliances that consume up to 20 amps.
Check the ring circuit at your home by using the fuse box, or contact an electrician nearby. They will be able tell you if the sockets in your home are connected to the same ring or are separate and whether there is a separate circuit for your oven.
If you're in the market for a brand new dual fuel range cooker the size of your kitchen is a crucial factor to consider. We have a great range of cookers that will fit any space, including compact 50 - 60cm dual fuel models and vast 90cm + double oven options from leading brands like Rangemaster and StovesAreUs.
We also have a broad range of multifunction gas and electric cookers. These multifunction cookers let you cook a variety of meals, such as pasta, casseroles, and curries.
Currys offers a broad selection of Cookers. Explore our online collection or visit us in our store to view the range. We provide free home installation and delivery on selected range cookers and flexible payment options. Our team is on hand to answer any questions you may have. You can contact us via email or phone. Credit is subject to status and terms & conditions apply.
What is freestanding dual fuel range cooker of the switch on a cooker?
There is a lot of confusion about the maximum current draw of a cooker switch. The reality is that the majority of cookers aren't made to plug into a standard socket, but instead are wired hard and fed into an oven ring circuit. This is because they typically consume more than 20 amps of power each time the gas hob and electric oven are being used.
There aren't any dual fuel range cookers that can be installed in a standard socket, as this would pose an extremely high risk of fire and would violate electrical regulations. A licensed electrician should install new electrical wiring in the kitchen, connecting them to a cooker. They will also ensure that the load of the oven and hob do not exceed the circuit's power supply capacity.
The advantages of a dual fuel cooker are the responsive heating of a gas cooktop along with the precision of an electric oven. They are adored by chefs as well as home cooks. Dual cookers that use fuel are great for experimenting with various cooking techniques, including searing or grilling.
When buying a new range cooker, you'll have to consider various aspects like size, function and cost. It is also necessary to have an electrical connection to your home to connect the appliance. If you're not sure, it is best to book an appointment with a Gas Safe engineer to inspect your property before installation.
The Currys range of dual fuel range cookers has options to suit a variety of budgets, ranging from low-cost models from Indesit and Zanussi to our own exclusive Essentials collection. If you are looking for something more sophisticated, we stock a variety of premium JennAir models, that come with several new features.
It is crucial to read the owner's guide before purchasing a dual-fuel range cooker. It will provide you with specific information about the gas and electrical requirements. It is essential to ensure that your house has a gas hook-up that is suitable, and you may need to get a plumber to install it for you, if needed. Depending on your home, you will also need to make sure that you have a dedicated cooker ring circuit in place and endorsed by a licensed electrician.